PB298Q
LCD Monitor
User Guide
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
As an Energy Star® Partner, our company has determined
that this product meets the Energy Star® guidelines for energy
efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iii
Safety information
•
•
•
•
•
Before setting up the monitor, carefully read all the documentation that
came with the package.
To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
•
•
Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
•
•
•
Use the appropriate power plug which complies with your local power
standard.
Do not overload power strips and extension cords. Overloading can
result in fire or electric shock.
Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
•
Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
•
•
Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100 ~ 240V AC.
•
•
The socket-outlet shall be installed near the equipment and shall be
easily accessible
If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
iv
Care & Cleaning
•
Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
•
•
Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
•
The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
•
•
You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
•
When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
v
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
vi
1.1
Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper,
broader, and brighter display, plus a host of features that enhance your
viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings you!
1.2
Package contents
Check your package for the following items:
LCD Monitor
Monitor Base and Stand
Quick Start Guide
Warranty Card
1x Power Cord
1x DVI Cable (Dual Link)
1x HDMI Cable
1x DisplayPort Cable
1x Audio Cable
1x Cable Clip
4x Screws
•
If any of the above items is damaged or missing, contact your retailer
immediately.
ASUS LCD Monitor PB298Q
1-1
1.3
Monitor introduction
1.3.1
Front view
1
2
4
5
6
7
3
1.
•
QuickFit Button:
This is a hotkey to activate the QuickFit function designed for alignment.
•
The QuickFit function contains 7 pages of common grid patterns, paper
2.
Button:
•
Use this hotkey to switch from six video preset modes ({Scenery Mode},
{Standard Mode}, {Theater Mode}, {Game Mode}, {Night View Mode},
and {sRGB}) with SPLENDID™ Video Intelligence Technology.
•
Exit the OSD menu or go back to the previous menu as the OSD menu is
active.
3.
Button:
•
Press this button to decrease the value of the function selected or move
to the next function.
•
This is also a hotkey for Volume adjustment.
4.
•
Button:
Press this button to enter the OSD menu.
•
Press this button to enter/select the icon (function) highlighted while the
OSD is activated.
1-2
Chapter 1: Product Introduction
5.
Button:
•
•
Press this button to increase the value of the function selected or move to
the previous functions.
This is also a hotkey for Brightness adjustment.
6.
7.
Input Select Button:
•
Use this hotkey to switch from input signal.
Power Button/Power Indicator:
•
•
Press this button to turn the monitor on/off.
The color definition of the power indicator is as the below table.
Status
White
Amber
OFF
Description
ON
Standby mode
OFF
ASUS LCD Monitor PB298Q
1-3
1.3.3
QuickFit function
The QuickFit function contains three patterns: (1) Grid (2) Paper size (3)
Photo size.
1. Grid pattern: Facilitates designers and users to organize content and
layout on one page and achieve a consistent look and feel.
Alignment Grid
EXIT
QuickFit
2. Paper size: Provides users to view their documents in real size on the
screen.
Letter
EXIT
QuickFit
3. Photo size: Provides photographers and other users to accurately
view and edit their photos in real size on the screen.
2x2
8x10
4x6
3x5
5x7
EXIT
QuickFit
EXIT
QuickFit
ASUS LCD Monitor PB298Q
1-5
2.1
Assembling the base and stand
To assemble the base and stand:
1. Carefully put the front of the monitor face down on a clean table.
2. Attach the stand to the monitor, use a screwdriver (not included) and
4 screws taken out of the package to lock the stand to the monitor
tightly.
3. Attach the base to the stand.
4. Use your fingers to lock the base to the stand tightly.
2
3
1
4
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
5. Insert the cable-clip to the slots on the stand. Adjust the monitor to
the angle that is most comfortable for you.
5
2-1
Chapter 2: Setup
2.2
Connecting cables
Connect the cables you need based on the introductions on chapter 1.3.2,
2.3
Detaching the base and stand
To detach the base and stand:
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Use your fingers to loosen the screw that lock the the base.
3. Detach the base from the stand.
4. Loosen 4 screws that locked the stand.
•
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Hold the base while removing the screw.
4
3
1
2
ASUS LCD Monitor PB298Q
2-2
2.4
Adjusting the monitor
•
For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
•
•
Hold the base to prevent the monitor from falling when you change its
angle.
You can tilt the monitor from -5˚ to +20˚, swivel from -60˚ to +60˚, and
lift the monitor’s height for about 150mm.
-5° ~ +20°
60°
60°
150mm
•
•
It is normal that the monitor slightly shakes while you adjust the viewing angle.
It is not recommended to have the monitor tilted under the pivot mode.
2-3
Chapter 2: Setup
3.1
OSD (On-Screen Display) menu
3.1.1
How to reconfigure
PB298
Splendid
Color
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Image
Sound
Input Select
Night View Mode
sRGB
System Setup
Move
Menu
Exit
1. Press the
button to activate the OSD menu.
2. Press and to navigate through the functions. Highlight and
activate the desired function by pressing the button. If the
function selected has a sub-menu, press and again to navigate
through the sub-menu functions. Highlight and activate the desired
sub-menu function by pressing the
button.
3. Press and to change the settings of the selected function.
4. To exit the OSD menu, press the
to adjust any other function.
button. Repeat step 2 and step 3
3.1.2
OSD function introduction
1. Splendid
This function contains six sub-functions that you can select for your
preference. Each mode has the Reset selection, allowing you to
maintain your setting or return to the preset mode.
PB298
Splendid
Color
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Image
Sound
Input Select
Night View Mode
sRGB
System Setup
Move
Menu
Exit
ASUS LCD Monitor PB298Q
3-1
•
•
•
•
•
Scenery Mode: This is the best choice for scenery photo displaying with
SPLENDID™ Video Intelligence Technology.
Standard Mode: This is the best choice for document editing with
SPLENDID™ Video Intelligence Technology.
Theater Mode: This is the best choice for movie watching with
SPLENDID™ Video Intelligence Technology.
Game Mode: This is the best choice for game playing with SPLENDID™
Video Intelligence Technology.
Night View Mode: This is the best choice for playing dark-scene game
or watching dark-scene movie with SPLENDID™ Video Intelligence
Technology.
•
sRGB Mode: This is the best choice for viewing photos and graphics
from PCs.
•
•
In the Standard Mode, the {Saturation}, {Skin Tone}, {Sharpness}, and
{ASCR} functions are not user-configurable.
In the sRGB Mode, the {Saturation}, {Color Temp.}, {Skin Tone},
{Sharpness}, {Brightness}, {Contrast}, and {ASCR} functions are not user-
configurable.
2. Color
Select the image color you like from this function.
PB298
Splendid
Color
Brightness
Contrast
Saturation
Hue
90
80
Image
Sound
50
50
Input Select
Color Temp.
Skin Tone
Gamma
User Mode
Natural
2.2
System Setup
Color Reset
Move
Menu
Exit
•
Brightness: The adjusting range is from {0} to {100}. The
button
is also a hotkey to activate this function.
•
•
•
•
Contrast: The adjusting range is from {0} to {100}.
Saturation: The adjusting range is from {0} to {100}.
Hue: Shift the image color between green and purple.
Color Temp.: Contain three preset color modes ({Cool}, {Normal},
{Warm}) and one {User Mode}.
3-2
Chapter 3: General Instruction
•
Skin Tone: Contain three color modes including {Reddish}, {Natural},
and {Yellowish}.
•
•
Gamma: Set the color mode to {2.2} or {1.8}.
Color Reset:
•
Current mode color reset:
Reset the color settings of current color mode to the factory default
value.
•
All modes color reset:
Reset the color settings of all color modes to the factory default
value.
•
In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from {0} ~ {100}.
3. Image
Set the image related setting from this menu.
PB298
Splendid
Color
Sharpness
Trace Free
Aspect Control
ASCR
50
60
Image
Sound
Full
OFF
Input Select
System Setup
Move
Menu
Exit
•
•
•
•
Sharpness: Adjust the picture sharpness. The adjusting range is from {0}
to {100}.
Trace Free: Speed up the response time by Over Drive technology. The
adjusting range is from lower {0} to faster {100}.
Aspect Control: Adjust the aspect ratio to {Full}, {4:3}, {OverScan},
{1:1}. The {OverScan} is available only for HDMI source.
ASCR: Turn on or off the dynamic contrast ratio function.
ASUS LCD Monitor PB298Q
3-3
4. Sound
Adjust the sound settings to your preference.
PB298
Splendid
Color
Volume
Mute
50
OFF
Image
Sound
Source
DisplayPort
Input Select
System Setup
Move
Menu
Exit
5. Input Select
Select the input source from DVI, HDMI, or DisplayPort.
PB298
Splendid
Color
DVI
HDMI
Image
Sound
DisplayPort
Input Select
System Setup
Move
Menu
Exit
6. System Setup
Adjust the system configuration.
PB298
Splendid
Color
Splendid Demo Mode
ECO Mode
OFF
OFF
Image
Sound
OSD Setup
Key Lock
Input Select
Information
Language
English
ON
System Setup
Power Indicator
All Reset
Move
Menu
Exit
3-4
Chapter 3: General Instruction
•
Splendid Demo Mode: Activate the demo mode for the Splendid
function.
•
•
ECO Mode: Activate the ecology mode for power saving.
OSD Setup: Adjust the horizontal postition ({H-Position}), vertical
position ({V-Position}), {OSD Timeout}, {DDC/CI}, and {Transparency}
of the OSD screen.
•
Key Lock: Select {On} to lock all the button functions (including the
Power Button).
•
Press and hold the
Key Lock function.
key for 5 seconds to enable or disable this
•
•
•
•
•
Information: Show the monitor information.
Language: Select OSD language.
Information: Display the monitor information.
Power Indicator: Turn the power LED indicator on/off.
All Reset: Select {Yes} to revert all settings to the factory default mode.
ASUS LCD Monitor PB298Q
3-5
3.2
Model
Specifications
PB298Q
29” W (73.025 cm)
2560 x 1080
Panel Size
Max. Resolution
Brightness (Typ.)
Intrisinc Contrast Ratio (Typ.)
Dynamic Contrast Ratio (Typ.)
Viewing Angle (CR=10)
Color Saturation (NTSC)
Display Colors
300 cd/m2
≧1000:1
≧80,000,000:1
178°(H) / 178°(V)
≧72% sRGB
16.7 Millions
Response Time (Typ.)
DisplayPort input
HDMI input
≦5 ms (Gray to Gray)
Yes
Yes
DVI input
YES (Dual Link)
Yes (3 W x 2)
Yes (3.5 mm Mini-jack)
Speaker
Earphone
Power On: < 55 W
Energy Star: < 31 W
Standby: < 0.5 W
Power Off: < 0.5 W
Power Consumption
Power Saving Mode
Power Off Mode
Tilt
< 0.5 W
< 0.5 W
-5° ~ +20°
Swivel
-60° ~ +60°
Height Adjustment
Phys. Dimension (WxHxD)
Box Dimension (WxHxD)
Net Weight (Esti.)
Gross Weight (Esti.)
Voltage Rating
150 mm
700 x 376(lowest) x 218 mm
804 x 437 x 253 mm
8.5 kg
11.7 kg
AC 100 ~ 240 V
Energy Star 6.0, UL/cUL, CB, CE, EuP, FCC,
CCC(5,000m), BSMI, Gost-R, C-Tick, VCCI, RoHS,
WEEE, Windows 7 and 8 WHQL, TCO 6.0,
EPEAT Gold, PSE, HDMI1.4, DP1.2
Regulation approvals
*Specifications are subject to change without notice.
3-6
Chapter 3: General Instruction
3.3
Troubleshooting (FAQ)
Problem
Possible Solution
button to check if the monitor is in the
Power LED is not ON
•
•
Press the
ON mode.
Check if the power cord is properly connected to
the monitor and the power outlet.
The power LED lights amber and
there is no screen image
•
•
•
•
Check if the monitor and the computer are in the
ON mode.
Make sure the signal cable is properly connected
the monitor and the computer.
Inspect the signal cable and make sure none of the
pins are bent.
Connect the computer with another available
monitor to check if the computer is properly
working.
Screen image is too light or dark
•
Adjust the Contrast and Brightness settings via
OSD.
Screen image bounces or a wave
pattern is present in the image
•
•
Make sure the signal cable is properly connected to
the monitor and the computer.
Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
•
Inspect the signal cable and make sure that none of
the pins are bent.
Perform Reset via OSD.
Adjust the R/G/B color settings or select the Color
Temperature via OSD.
•
•
No sound or sond is low
•
•
•
Make sure the audio cable is properly connected to
the monitor.
Adjust the volume settings of both your monitor and
computer.
Make sure the computer sound card driver is
properly installed and activated.
ASUS LCD Monitor PB298Q
3-7
3.4
Supported Timing List
VESA / IBM Modes Support Timing (DVI, HDMI, and DisplayPort inputs)
Resolution
Refresh Rate
Horizontal Frequency
640 x 350
640 x 480
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
800 x 600
70 Hz
60 Hz
67 Hz
75 Hz
70 Hz
56 Hz
60 Hz
72 Hz
75 Hz
75 Hz
60 Hz
60 Hz
70 Hz
75 Hz
75 Hz
60 Hz
60 Hz
60 Hz
60 Hz
75 Hz
60 Hz
60 Hz
75 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
31.469 KHz
31.469 KHz
35 KHz
37.5 KHz
31.469 KHz
35.156 KHz
37.879 KHz
48.077 KHz
46.875 KHz
49.725 KHz
31.02 KHz
48.363 KHz
56.476 KHz
60.023 KHz
67.5 KHz
832 x 624
848 x 480
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 800
1280 x 960
1280 x 1024
1280 x 1024
1366 x 768
1440 x 900
1440 x 900
1680 x 1050
1680 x 1050
1920 x 1080
1920 x 1080
2560 x 1080
44.772 KHz
49.702 KHz
60 KHz
63.981 KHz
79.976 KHz
47.712 KHz
55.935 KHz
49.725 KHz
65.29 KHz
64.674 KHz
67.5 KHz
66.587 KHz
66.636 KHz
CEA-861 Formats Supported Timing (HDMI and DisplayPort input)
Resolution
Refresh Rate
Horizontal Frequency
640 x 480P
720 x 480P
720 x 576P
59.94 / 60 Hz
59.94 / 60 Hz
50 Hz
31.469 / 31.5 KHz
31.469 / 31.5 KHz
31.25 KHz
1280 x 720P
1280 x 720P
1440 x 480P
1440 x 576P
1920 x 1080i
1920 x 1080i
1920 x 1080P
1920 x 1080P
50 Hz
37.5 KHz
59.94 / 60 Hz
59.94 / 60 Hz
50 Hz
50 Hz
59.94 / 60 Hz
50 Hz
44.955 / 45 KHz
31.469 / 31.5 KHz
31.25 KHz
28.125 KHz
33.716 / 33.75 KHz
56.25 KHz
59.94 / 60 Hz
67.433 / 67.5 KHz
* The modes not listed in the above tables may not be supported. For optimal resolution, we
recommend that you choose a mode listed in the above tables.
3-8
Chapter 3: General Instruction
|