ALCATEL Mobile Phones F200 User Manual

10.  
T
1.3. Base Station Overview  
3. INSTALLING YOUR PHONE  
In idle/predialing mode: Press to make a call  
In Redial list/Call List/Phonebook entry: Press to make a call  
to the selected entry in the list  
3.1. Installing and Charging the Batteries  
1. Slide down to open the battery compartment cover.  
2. Place the 2 supplied AAA rechargeable batteries as indicated.  
Pay extra attention to direction of polarity.  
During ringing: Press to answer a call  
3. Slide the battery compartment cover back.  
1.2. Handset Overview (Versatis F250 only)  
4. Put the handset on the base and charge for 15 hours before  
using the handset for the first time. The handset will give a  
beep when it is properly placed on the base or charger.  
In keeping with our environmental preservation and  
compliance commitment, we include mini-guides in our  
packaging. More complete instructions and online assistance  
are available on our website:  
Notes:  
1. Use only the supplied NiMH rechargeable batteries.  
2. If the handset will not be used for a long time, disconnect and  
remove the batteries to prevent possible leakage.  
1.  
2.  
A
Press A on the base station to page your handset. It will  
ring for approximately 60 seconds.  
Press and hold A on the base station for about five seconds,  
the base station is entered into registration mode and allows  
handset registration.  
@
,
Steadily on while the handset is charging or in use. (Applicable  
only when the LED I/O switch is slid to “I”)  
Flash when receiving an incoming call. (Applicable only when  
the LED I/O switch is slid to “I”)  
3. LED I/O SWITCH (Bottom of the Base)  
1.  
M
Slide the switch to "O" position to turn off the base LED  
Slide the switch to "I" position to turn on the base LED when  
the handset is charging on the base or in use  
3.2. Connecting the Base Station  
1. Plug one end of the telephone line cord into the telephone  
jack on base bottom.  
2. Plug the small end of power adapter into a power jack on  
base bottom.  
In idle mode: Press to access the main menu  
In sub-menu mode: Press to confirm the selection  
During a call: Press to access Intercom/Phonebook/Redial  
List/Call List  
3. Connect the power supply plug to the base jack  
horizontally, and route the power supply cord through  
the slot.  
Ecologic  
4. Plug the large end of power adapter into a wall power outlet.  
attitude  
2.  
1. GETTING TO KNOW YOUR PHONE  
1.1. Handset Overview (Versatis F200 Only)  
C
1.4. Display Icons and Symbols  
The LCD display gives you information on the current status of  
the telephone.  
5. Plug the other end of the telephone line cord in to the  
telephone jack or micro-filter.  
6. Always use the cables provided in the box.  
In main menu mode: Press to go back to idle screen  
In sub-menu mode: Press to go back to previous level  
In sub-menu mode: Press and hold to go back to idle screen  
In editing/predialing mode: Press to clear a character/digit  
In editing/predialing mode: Press and hold to delete all the  
characters/digits  
During a call: Press to mute/unmute the microphone  
In idle mode: Press to intercom another handset  
In ringing: Press to suppress handset ringer  
+
In idle mode: Press to access the call list  
In menu mode: Press to scroll up the menu items  
In Phonebook list/Redial list/Call List: Press to scroll up the  
list  
During a call: Press to increase the volume  
In ringing: Press to increase the ringer volume  
-
In idle mode: Press to access the redial list  
In menu mode: Press to scroll down the menu items  
In Phonebook list/Redial list/Call List: Press to scroll down the  
list  
3.  
4.  
5.  
Steadily on when the handset is in range of the base.  
h
Flash when out of range of the base or not registered to  
the base.  
If you have broadband service,  
a micro-filter (not included) is required.  
Steadily on when an intercom is in progress.  
j
Flash when there is an incoming internal call.  
3.3. Connecting the Charger(s) (for Duo/Trio models)  
Plug the power adapter into mains socket.  
Indicate a call is in progress.  
k
l
x
a
g
(Versatis F250 only)  
During a call: Press to decrease the volume  
In ringing: Press to decrease the ringer volume  
O
If you have a Broadband line  
Indicate that handsfree is being used.  
1.  
2.  
M
If you connect your telephone to a line with a broadband  
connection, you will need to insert a micro-filter between the  
telephone and the telephone line, otherwise you may get  
interference between the telephone and the broadband, which  
could cause problems.  
In a home with broadband, every telephone must have a micro-  
filter connected, not just the one at the telephone point that your  
modem is connected to. If you need more broadband micro-  
filters, contact your broadband supplier.  
Steadily on when an alarm is set.  
Flash when the alarm time set before reaches.  
In idle mode: Press to access the main menu  
In sub-menu mode: Press to confirm the selection  
During a call: Press to access Intercom/Phonebook/Redial  
List/Call List  
During a call: Press to end a call and go back to idle screen  
In menu/editing mode: Press to go back to previous menu  
In menu/editing mode: Press and hold to go back to idle  
screen  
Indicate that the keypad is locked.  
Indicate when there are received new Voice Message  
Waiting (VMWI) not yet read.  
Disappear when all the voice messages have been read.  
(Network service dependent)  
C
In main menu mode: Press to go back to idle screen  
In sub-menu mode: Press to go back to previous level  
In sub-menu mode: Press and hold to go back to idle screen  
In editing/predialing mode: Press to clear a character/digit  
In editing/predialing mode: Press and hold to delete all the  
characters/digits  
During a call: Press to mute/unmute the microphone  
In idle mode: Press to intercom another handset  
In ringing: Press to suppress handset ringer  
In idle mode: Press and hold to power off the handset  
In idle mode: Press and hold to power on/off the handset  
R
In idle/predialing mode: Press to insert a flash  
During a call: Press to dial a flash  
6.  
7.  
Indicate that the ringer is switched off.  
n
P
In idle mode: Press to access the phonebook list  
Indicate when the battery is fully charged.  
3.  
4.  
5.  
6.  
8.  
9.  
+
S
b
Whole icon flashes when the battery performs initial  
In idle mode: Press to access the call list  
In menu mode: Press to scroll up the menu items  
In Phonebook list/Redial list/Call List: Press to scroll up the  
list  
During a call: Press to increase the volume  
In ringing: Press to increase the ringer volume  
-
In idle mode: Press to access the redial list  
In menu mode: Press to scroll down the menu items  
In Phonebook list/Redial list/Call list: Press to scroll down the  
list  
During a call: Press to decrease the volume  
In ringing: Press to decrease the ringer volume  
O
During a call: Press to end a call and go back to idle screen  
In menu/editing mode: Press to go back to previous menu  
In menu/editing mode: Press and hold to go back to idle  
screen  
In idle mode: Press and hold to power off the handset  
In idle mode: Press and hold to power on/off the handset  
R
In idle/predialing mode: Press to insert a flash  
During a call: Press to dial a flash  
P
During a call: Press to turn on/off the speakerphone  
In Idle mode/Predialing mode/Redial list/Call List/Phonebook  
entry: Press to make a call with speakerphone  
During ringing: Press to answer a call with speakerphone  
ALPHANUMERIC KEYPAD, * #  
* key in idle mode: Press and hold to enable or disable the  
keypad lock  
# key in idle mode: Press and hold to turn on/off the ringer  
# key in call list mode: Press to review caller’s number if  
applicable  
0 key in predialing/number editing mode: Press and hold to  
insert a pause  
1, 2, 3 key in idle/off hook mode, press and hold to dial the  
stored direct memory number  
charging.  
Internal block icon flashes when the battery is in final  
charging stage.  
Indicate when the battery needs charging.  
Flash when low battery power level is detected.  
Indicate when more characters are existed before the text  
currently displayed.  
Indicate when more characters are existed after the text  
currently displayed.  
Indicate when new call is received.  
Turn off when new call has been read.  
,
v
[
]
s
Scroll up/down the menu items/Phonebook list/Redial list/  
Call List.  
f
10.  
T
In idle/predialing mode: Press to make a call  
In Redial list/Call List/Phonebook entry: Press to make a call  
to the selected entry in the list  
2. PRECAUTIONS  
The signal quality will depend on the location and environment of  
the base and handset.  
During ringing: Press to answer a call  
ATLINKS Europe  
22 quai Gallieni  
92150 Suresnes- France  
Position your Versatis F200/Versatis F250 away from sources  
of excessive heat (radiators, direct sunlight, etc.) and protect it  
from vibrations and dust. Never allow your telephone to come  
into contact with water or other liquids, or with aerosols. To  
reduce the risk of interference and optimize reception, take  
particular care not to install the base in the immediate vicinity of  
windows, large metal objects, reinforced concrete, televisions,  
music centres, VCR or DVD players, halogen lamps or heating  
devices, fluorescent lighting, burglar alarms, microwave ovens,  
computers, etc.  
This telephone requires an electrical power supply in order to  
function.  
To clean your Versatis F200/Versatis F250, use an antistatic  
cloth lightly moistened with water.  
7.  
8.  
9.  
© ATLINKS 2011 - Reproduction prohibited.  
In idle mode: Press to access the phonebook list  
E
In idle mode: Press to access the redial list  
ALPHANUMERIC KEYPAD, * #  
* key in idle mode: Press and hold to enable or disable the  
keypad lock  
# key in idle mode: Press and hold to turn on/off the ringer  
# key in call list mode: Press to review caller’s number if  
applicable  
The Manufacturer reserves the right to modify the specifications  
of its products in order to make technical improvements or  
comply with new regulations.  
ALCATEL and ATLINKS are registered trademarks.  
The Alcatel logo and Alcatel name are trademarks of Alcatel and  
used under licence by ATLINKS.  
,
0 key in predialing/number editing mode: Press and hold to  
insert a pause  
1, 2, 3 key in idle/off hook mode, press and hold to dial the  
stored direct memory number  
NB: Your Versatis F200/Versatis F250 is a DECT™* standard  
appliance designed to receive and transmit telephone calls. It  
is designed for connection to the public telecommunications  
network.  
F200/F200 Duo/Trio  
F250/F250 Duo/Trio  
A/W No.: 10000259 Rev.1 (EN)  
Printed in China  

GE JGP331 User Manual
GE GFK 0726B User Manual
Epson LS57P1D User Manual
Electrolux U20412 User Manual
Daewoo 20Q1 User Manual
Cypress CY7C1320CV18 250BZXC User Manual
Black Box Computer Hardware USB Directors RS 232 User Manual
Audiovox GX2411ci User Manual
AT T Door Phone Controller User Manual
Apple SDRAM DIMM User Manual